Publishing

Thirty-four Years – Instructor, Machinist, CNC and CAD/CAM (Part 1) – Security Boulevard

As I’ve now ended 34+ years of public service, I’m going to burn a few posts on where I’ve been and what I’ve tried to accomplish.
Like many people my age, my path toward a career in technology was non-linear. My first stop after a Baccalaureate in Physics was a move into teaching Machine Tool trades at a 2-year college. Make sense, right? Actually I had taken a few programming courses in college (FORTRAN, Pascal, PDP-8 Assembler, SNOBOL, FORTH), had worked my way through college as a machinist, and taught myself how to program CNC machines. So the trade school route wasn’t too much of a stretch.
When I started teaching (in 1984…arghh…) the tools of choice for programming machine tools were either a Flexowriter, a Model 43 Teletype with a tape punch, or a really expensive CAD/CAM system. The CAD/CAM system that I inherited was a 1970’s vintage TTY based system running on a Data General Nova 3. Input was a proprietary language entered via a TTY. Output was either a tape punch or a one-pen HP plotter. To boot the Data General you toggled switches on the front panel to fire off a couple of instructions that would boot from floppy. Note that there was no video/monitor/CRT. If you wanted to see your machine tool path, you put ink in the pen and plotted the path on 11 x 17 paper.
I convinced the college to move from that to a modern (for the day) PC based system that had a color monitor,  8″ floppies and ran the UCSD P-System operating system. And that cost $25,000. The CAD side of the system could draw 3D wire frames and output to the CAM system. Students would learn manual G-code programming and a bit of drafting and CAD/CAM while programming and running their parts on the CNC. They also learned a bit about using a keyboard, digitizer and mouse, editing saving and retrieving text, managing files, etc. For nearly all students, this was their first exposure to computers.
The college was closely aligned with local business and industry, and as a result we developed a relationship with the tool room at the local 3M plant. They hired our graduates and advised us on curriculum. At the time, our CAD/CAM was far ahead of what the local plant had available to them. The tool room did pretty complex mold repair and a CNC, but with no reasonable means of programming one-off mold repairs, the machine was underutilized. As a favor to them I used the colleges CAD/CAM to generate machine tool paths for their CNC. The most complex and interesting was a machine tool path for one of 3M’s most popular tape dispensers, generated using a ton of algebra that the CAD/CAM could convert to a tool path.
About that same time, our Drafting Department introduced AutoCAD on first-generation IBM PC’s that still had the cassette port. At the time is was pretty primitive compared to the CAD/CAM that we had in the machine shop.
We also had a significant issue teaching students how to program and operate CNC machine tools. As those of you who have done any machine tool programming know, typographical errors can get really expensive really fast. Misplace a decimal point and you can crash machine and incur thousands of dollars worth of damage. Some schools tried to mitigate this by limiting students exposure to the CNC machines, something which I thought would defeat the point of  hands-on vocational training.
After having to tear down CNC machine tool spindles, replace spindle bearings and re-align ways, I decided to go a different direction and try and come up with a way of proving that the students programs were valid and would not crash the machine. I did a little bit of experimenting, learned ‘C’, and wrote software that could read a machine tool G-code program and draw the three dimensional tool path on screen. One could also run the simulation from different 3D viewpoints, edit and save the G-code program, and download it to the CNC machine. We sold a few copies of that program to other schools – just about enough to pay for the ads that we ran in trade publications.
The available PC screens at that time were technologies like EGA, CGA, and Hercules graphics. The Microsoft ‘C’ compiler has libraries that helped manage graphics and isolate most of the low-level screen management from the developers, so I didn’t have to use much assembler, and could reliably draw onto a canvas and let the libraries worry about the details of the graphics cards.
I also was frustrated at the quality of the CNC textbooks that were commercially available, so I started creating my own content. That content eventually evolved into a CNC textbook that was published by one of the major textbook publishers. Writing a textbook, drawing the line art in AutoCAD, and having a friend take all the photos was a great learning experience. The text was  somewhat successful. Even after 27 years you can still buy a copy of the book on Amazon – though the published dumped all their copies years ago. Seems like some things never die.
The college’s teaching and learning methodology was heavily dependent on both written and video content. To facilitate creating written content, I started using Desktop Publishing systems – really just a PC with a decent monitor and GUI editing software. Once word processors were reasonably capable, the dedicated desktop publishing systems were overkill so I stopped using them.
By the time I had the textbook ready to publish, I had plenty of experience with desktop publishing, word processing and CAD/CAM. I offered to provide the text and line art electronically, but the publisher clearly wasn’t going for that, so I supplied a stack of printed paper, plotted line art, and 8 x 11 photos. The publisher handed the stack off to an independent contractor who started to key and scan the whole mess into a desktop publishing package. I contacted her directly and sent her a few floppies. She thanked me. 
I enjoyed teaching – at least for a while. I think my proudest moment was when a student of mine came back a few years after graduation, had started his own mold-making shop, hired a handful of people and offered that ‘anytime I needed a job, he’d hire me’. Having helped bootstrap him and many others was very rewarding.

Part 2 – Networks and Software Development

Recent Articles By Author

*** This is a Security Bloggers Network syndicated blog from Last In – First Out authored by Michael Janke. Read the original post at: http://feedproxy.google.com/~r/LastInFirstOut/~3/DEEicNkYi04/thirty-four-years-instructor-machinist.html

Click Here to Buy Kratom Online

Left Coast Kratom is here to help you experience the freshest highest quality kratom powders and extracts at competitive prices.